CZDA: Zone Motor Installation

PAGE CONTENTS

CZDA is the proprietary damper motor for Airstream clip-in and barrel dampers

These damper motors are designed specifically for iZone control systems and Airstream barrel dampers. The motor colour is yellow

Connect Zone Damper Actuators (CZDA) to the zone ports on the CPU using RJ12 cables

Screen printing:

RJ12 Connector:

Earlier models may be fitted with an RJ11 connector

Pin-out for the connector is indicated below

Shaft:

The square shaft is designed for iZone dampers but will also fit Advantage Air Exact Air fittings

Casing:

Blade position indicator:

Indicates the position of the motors / blade between open and closed

The indicator must be free to move, if it is obstructed the motor will be damaged

Fixing screws:

Two screws are used to fix the motor to the damper body

Model numbers	CZDA
Power supply	24VAC 50Hz
Power connection	RJ12 6 pole connector
Power consumption	5 VA
Operating Temperature	Up to 65^oC
RPM	1.04
Torque	2.5Nm
Drive rotation	Clockwise and Counter clockwise
Stop mechanism	Independent micro switches for open and closed
O/A Dimensions	Height 57mm (Excludes shaft) Diameter 100mm
Weight	348g