CUCM: Universal Module - Install Guide

PAGE CONTENTS

1 PHOTO & DESCRIPTION
2 SPECIFICATIONS
3 CUCM: INSTALL INSTRUCTIONS
4 GAS HEATING WIRING DIAGRAMS
5 REVERSE CYCLE WIRING DIAGRAMS
6 SPECIAL CASE WIRING DIAGRAMS
- 6.1 BRIVIS HEATER + COOL + FAN
- 6.2 VENTILATION SYSTEM - 3 FAN SPEEDS

PHOTO & DESCRIPTION

The CUCM is an interface module that is used to connect equipment such as AC units, Ducted gas heaters and Outside air ventilation system to an iZone system

RJ 45 ports: 2 x 1Zone network ports for connection to C225 and one spare

Wiring terminals: Wiring terminals see different configurations for each application

SPECIFICATIONS

Model Number	CUCM, CUCMK
Power Supply	Via RJ45 from C225
Casing material	Fire retardant ABS plastic
Operating Temperature	Up to 65^oC
Rating	24 V ~ 0.5A
Communications protocols	CAN Bus - Wired
Cable included - CUCMK Only	CFC1S (CAT5E)
O/A Dimensions	Height 32 mm Width 119 mm Length 105 mm
Weight (Excludes power supply)	160 g

Connect cables as shown on the wiring diagram for the respective option. (24V maximum)
Configure the correct system type on the touch screen
Configure the Run on timer, anti-cycle timer, 2nd stage offset, 2nd stage delay and fan control on the touch screen, as applicable
Test for correct operation