Selecting the Controlling Sensor as RF ON Nova

If a return air sensor is not installed, you can set the controlling sensor to RF. Follow the steps below based on your system type:

For CRFSW Temp Sensor:

1. Locate the node at the bottom left of the device.

2. Point the node to RF to activate the RF sensor.

For NOVA Panel:

1. Tap on Menu > Devices.

2. Select + Temp Sensor.

3. Choose the zone where you want to assign the sensor.

4. Pair the sensor with the selected zone.

5. This sensor will function as a return air sensor or reference temperature sensor.

For Compact Sensor Users:

• The target zone will appear as the air conditioning system name at the top of the list.

• Ensure the correct system is selected for accurate temperature readings.