CCTSS#: Nano - Install Guide

The CCTSS# is the small capacitive user interface for the iZone 420 and 425 systems

Open

Open

Reset button: Press the reset button on the underside of the screen to reset the entire iZone air conditioning system

Colour touch screen

Trim: Colour trim is provided with each CCTSS# to decorate the CCTSS#

Glass fascia: The front of the screen is made from hardened glass

Ventilation holes: Ventilation holes are provided on the top, bottom and back of the screen to encourage air circulation through the internals of the CCTSS#

Home button: The home button is sensitive to touch (capacitive)

Wall bracket: Remove the wall bracket from the screen and mount it to a flat wall. Be careful not to over tighten the mounting screws if the wall is not flat as this will distort the wall bracket and the CCTSS# will not clip back onto the wall bracket

Wall bracket fixing holes: Use screws that sit flush inside the countersunk holes. If you use dome head screws the CCTSS# will not clip back onto the wall bracket

RJ 45 connector: This where you connect the CFC12S or CFC25S CAT 5E cable

Back of CCTSS#: By turning the CCTSS# over and clipping the wall bracket on this is what you will see

Hardened glass facia

Colour Touch screen

Front plastic housing

Reset Button

Insulation / adhesion

PCB

Back plastic housing

Wall bracket

Screws

Trim