C325F2 - Fujitsu 2

Fujitsu Compatibility:

ARTG36LHTA - ARTG45LHTA - ARTG60LHTA - ARTG60LDTA

C320F & C325F have been superseded by C325F2

Can use RA, Zones, Master and RF as controlling sensor

Polarity is critical see below, for correct connection

Do NOT use the terminal 1 (12V) when connecting to an iZone system

  • Connect a shielded, 2 core, twisted pair control cable from the  C225 / C325F2 to the  2 & 3 terminals in the Fujitsu FCU

iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

2 / 3: Connect the 2 /3 cable from the Fujitsu FCU to here. Polarity is critical

Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone

 

Fujitsu Compatibility:

ARTH60LHTA - ARTH60LHTB - ARTH54LHTA

Can use RA, Zones, Master and RF as controlling sensor

Polarity is critical see below, for correct connection

Do NOT use the terminal Y1 (12V) when connecting to an iZone system

  • Connect a shielded, 2 core, twisted pair control cable from the  C225 / C325F2 to the  Y2 & Y3 terminals in the Fujitsu FCU

  • Set this DIP switch (SW1) into the UP position

iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

Y2 / Y3: Connect the Y2 / Y3 cable from the Fujitsu FCU to iZone CPU. Polarity is critical

Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone