C325F2 - Fujitsu 2

Fujitsu Compatibility:

Current Firmware Version - 1.11

SERIES & kW

INDOOR

OUTDOOR

ARTG Series Wiring: Connect AC control cable to 2 and 3 - Polarity IS Critical

High Static Single Phase - Compact Outdoor

ARTG30LHTA

ARTG36LHTA

ARTG45LHTA

 

High Static Single Phase

ARTG30LHTA

ARTG36LHTA

ARTG45LHTA

ARTG54LHTC

 

High Static Infinity Range - Single Phase ONLY

ARTG45LDTA (single phase)

ARTG54LDTA (single phase)

ARTG60LDTA (single phase)

 

High Static Three Phase

ARTC72LATU

ARTC90LATU

 

ARTH Series Wiring: Connect AC control cable to Y2-Y3 and SW1 dip switch ON - Polarity IS Critical

only compatible with C325F2 v1.11 module

High Static Single Phase

ARTH60KHTA ( Single Phase )

 

Standard Range

ARTH54KHTA (Single phase)

 

High Efficiency

ARTH60KHTB (Single phase)

 

Can use RA, Zones, Master and RF as controlling sensor

  • Connect a shielded, 2 core, twisted pair control cable from the  C225 / C325F2 to the  2 & 3 terminals in the Fujitsu FCU

iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

2 / 3: Connect the 2 /3 cable from the Fujitsu FCU to here. Polarity is critical

Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone

 

  • Connect a shielded, 2 core, twisted pair control cable from the  C225 / C325F2 to the  Y2 & Y3 terminals in the Fujitsu FCU

  • Set this DIP switch (SW1) into the UP position

iZone C225 module: Ensure the correct C325 module is connected for the AC unit make it is controlling

Y2 / Y3: Connect the Y2 / Y3 cable from the Fujitsu FCU to iZone CPU. Polarity is critical

Shielded cable: Shielded, 2 core, twisted pair cable must be used and is not supplied by iZone